Light Support
Choose from two quality shooting tables ranging in size from 27″ x 35″ to 48″ x 60″. These shooting tables are constructed with oversized wingnut knobs, torque levers, and heavy 16 gauge square steel tubing with self locking hardware.
Both have adjustable leveling feet and locking casters. Smaller model includes Plexiglas™. Easy assembly. Both ship UPS.
*1/8″ translucent white Plexiglas™ #2447 is recommended for The Studio shooting table.
The Studio
Uses only 48″ x 60″ of floor space. Four knob easy breakdown. Accepts 4′ x 8′ Plexiglas™ (not included). Height is 85″ maximum. Stabilizer bars hold Plexiglas™ flat. curved front for low camera angles. Locking back frame is adjustable flat to 90°. Seamless paper roll holder. Locking casters. Assembly required.
#40010 – $578.95
Studio-To-Go™
Uses only 27″ x 35″ of floor space. height measures 32″ in front and 52″ in back. Includes 27″ x 54″ white Plexiglas™. Stabilizer bars hold Plexiglas™ flat. Four knob easy breakdown. Curved front allows low camera angles. Locking casters. Assembly required.
#40500 – $488.95
Flex Lights™
Clamp on flexible lights. Uses medium base, fluorescent or incandescent lamps. Use with all shooting tables. 300 watt rated phenolic sockets. Eight foot cord. UL/CSA
#40542 – $118.95
Light Mover™ Rail Systems
Eliminate the light stand jungle and obtain more usable floor space. Factory pre-drilled rails and easy glide, 8 ball bearing, chrome/steel wheel trolleys provide the smoothest guide in the industry. Easy to install and can be mounted directly to ceilings of 8 foot or more. Drop ceiling tubes are available in 24″ and custom lengths. The spring counter-balanced scissors (lifetime powder coated) and 2 section telescope lifts support lights and softboxes up to 10 pounds and extend to 72″ and 50″ respectively. Save 25% to 33% when you order System Packages!
Two Telescope Light Mover™ System
#40620 – $629.95
Two Telescope/One Scissor Light Mover™ System
#40622 – $932.95
Two Scissor Light Mover™ System
#40630 – $1104.95
Three Scissor Light Mover™ System
#40632 – $1463.95
Two Light Systems Include:
2 – 9′ 10″ Fixed Rails
1 – 9′ 10″ Floating Rail
2 – Double Trolleys with Brake
2 – Lift Kits and Trolleys
2 – Cable Trolley Kits
8 – End Caps
2 – Safety Cables
2 – Rail Splicers
Three Light Systems Include:
2 – 9′ 10″ Fixed Rails for 40622, 2T1S Light Mover™ System
OR
2 – 14′ Fixed Rails for 40632 – 3S Light Mover™ System
2 – 9′ 10″ Floating Rails
4 – Double Trolleys with Brake
3 – Lift Kits and Trolleys
3 – Cable Trolley Kits
12 – End Stops
3 – Safety Cables
2 – Rail Connectors
Light Mover™ Rail System Components:
Scissor Lift Kit and Trolley
Supports lights up to 10 lbs. Spring counter-balanced. Extends from 13″ to 72″. Includes single trolley with brake, 5/8″ male adapter, and safety cable.
#40642 – $449.95
Telescope Lift Kit and Trolley
Supports lights up to 10 lbs. Two sections extend from 24″ to 50″. Includes single trolley with brake, 5/8″ male adapter, and safety cable.
#40643 – $239.95
Double Trolley with Brake
16 wheel dual rotating carriage to join the floating rail to the fixed rail.
#40644 – $140.95
Single Trolley with Brake
8 wheel carriage for mounting Scissor Lift Kit to floating rail. Includes safety cable and 5/8″ stud.
#40646 – $79.95
Cable Trolley Kit
Suspends cables safely from rail system.
#40648 – $39.95
Fixed Ceiling Rails
Easily attaches to most ceilings with minor drilling. Includes rail joining plates and end stops.
#40650 – 63.95, 4 foot
#40652 – $88.95, 6 foot
Floating Rail
Most of these medications could also be habit forming, thus, doctors are exploring more ways for a better alternative. viagra sales you could check here Consume this medication only in viagra online overnight the presence of the sexual stimulation. One of the most well-liked medication for this really is discount cialis india. They were nicknamed this after a Native American cheap viagra from pfizer named Chief Black Hawk.
Glides along the length of the fixed rail.
#40654 – $245.95, 9′ 10″
#40655 – $137.95, 5 foot extension with joint plate
Joint Plate for extending Light Mover Floating Rails
Includes screw.
#40656 – $22.95
5/8″ to 3/8″ Adapter
6″ adapter with 3/8″ stud. Fits 5/8″ female fittings.
#40658 – $17.95
18″ Safety Cable
18″ plastic coated wore cable with snap hook.
#40666 – $12.95
******************************************************************
Unique system provides the helping hand you need. Segmented, one inch and one-half inch diameter snap together fittings, special clamps and adapters allow you to position and set props, lights, reflectors, gobos, gels, flags, and rods at virtually any angle and position. Helps you tame the light stand jungle.
Grip-It™ Light Stand Arm with Clamp
Fits male/female 3/8″ and 5/8″ light stands. 11″ of flexible segments for placement of gobos, scrim rods, reflectors, flags, small lights and flash heads.
#46070 – $46.95, with 1″ clamp
#46060 – $46.95, with top 3/8″ mounting stud. Fits male/female ¼”-20 tripod threads.
Grip-It™ Dual Arm Triple Clamp with Magnetic Base and Plate
Perfect for table top photography of jewelry, small objects, etc.
#46010 – $95.95
Grip-It™ Magnetic Light Stand/Ceiling Boom
Flexible with 45° tilt and 360° rotation. Includes 100 lb. pull magnetic base and steel plate with mounting holes. Fits tripods, 3/8″ and 5/8″ lights stands. Perfect for placement of back lights, flash heads, gobos, reflectors, flags, etc. Adapters included.
#46050 – $49.95, 5¾” length
Grip-It™ Single Arm w/1″ Clamp, Magnetic Base, Tripod/Wall Plate
For holding gels, gobos, flags and reflectors for special effects and lighting control.
#46020 – $76.95, 12½” length
Grip-It™ Single Arm with Dual Clamps
1″ clamps, 12″ length.
#46030 – $52.95
Grip-It™ Flexrod™
Special metal alloy will bend, twist, and reshape any direction. 24″ long. Holds flash, reflectors, gels and gobos. 3/8″ male/female.
#46200 – $34.95, Light Stand Arm Flexrod™, supports 4 lbs.
#46210 – $34.95, Light Stand Arm Flexrod™, supports 2 lbs.
Grip-It™ Magnetic Base™
Magnets include a “No Scratch Mylar Car Cap” base. Powerful magnetic base with ¼”-20 tripod, 3/8″ and 5/8″ stand adapters. Use to hold, lift, secure, and position hard-to-handle items.
#46160 – $35.95, holds 100 lbs, 3¼” diameter
#46170 – $55.95, holds 175 lbs, 5″ diameter
Flexgrip™
These indispensable holder feature double-ended, flexible stainless steel spring clips and/or black nylon “A” clamps. holds diffusers, gels, gobos, reflector cards in place. Bends, twists, stays put exactly here you want it. Patent pending.
#46114 – $19.95, 6″ with clip/1″ clamp
#46116 – $20.95, 12″ with clip/1″ clamp
#46118 – $23.95, 8″ with 1″ clamps
#46119 – $16.95, 6″ with ½” clamps
Zone System 18% Gray Cards
Correct color or black and white exposures every time regardless of contrast, brightness or conditions. Accurate to within 1%. Includes instructions. 8″ x 10″.
#22010 – $14.95, card stock, Pkg/2
Light Stand Adapters
Oversized aluminum, steel or brass. One Year Ltd Warranty. Made in U.S.A.
##21204 – $12.95, ¼”-20 to 3/8″-16 x 5/16″ long, brass
#21212 – $19.95, ¼”-20 female to 3/8″ stud x 2″ long
#21218 – $19.95, 3/8″ female to 5/8″ stud x 1½” long
#21220 – $19.95, 3/8″ female to 5/8″ stud x 2″ long
#21214 – $19.95, 5/8″ female to 3/8″ stud x 1¼” long
#21216 – $19.95, 5/8″ female to 3/8″ stud x 2″ long
Rapid Adapters
Adapter fits all 5/8″ or smaller stands horizontally or vertically. Side hole allows adapter to slide and lock in any position.
#21246 – $20.95, 3/8″
#21248 – $20.95, ¼”
Replacement Knobs
Industry standard knobs will fit most photographic equipment.
#21230 – $4.95, 2″ diamond knob, ¼”-20 x 1″ long
#21232 – $4.95, 1″ diamond knob, ¼”-20 x ½” long
#21236 – $4.95, 1″ diamond knob, ¼”-20 x ¾” long
#21234 – $4.95, 7/8″ round fluted knob, ¼”-20 x 2″ long
Super Clamp™
“A” clamps hold almost anything without damage. Tip swivels 135° to accommodate flat, uneven and round surfaces. Serrated edge to grip stands, booms and pipe securely. Heat resistant.
#01620 – $6.95, 1″ clamp, black nylon, adjustable tips
#01600 – $3.95, ½” metal clamp with vinyl tips
#01618 – $2.25, 3/4″ clamp, black nylon, adjustable tips
#01604 – $7.95, 2″ metal clamp with vinyl tips
Leave a Reply